From bb94bebfca5c576b32f211aaaa8d36b539512ebe Mon Sep 17 00:00:00 2001
From: James Talbert <jtalbert@iastate.edu>
Date: Fri, 5 Oct 2018 16:27:42 -0500
Subject: [PATCH] wip: initial quad hw platform project
---
quad/vivado_workspace/quad_hw.tcl | 1078 +++++++++++++++++
.../quad_hw/src/constrs/Zybo-Z7-Master.xdc | 198 +++
2 files changed, 1276 insertions(+)
create mode 100644 quad/vivado_workspace/quad_hw.tcl
create mode 100644 quad/vivado_workspace/quad_hw/src/constrs/Zybo-Z7-Master.xdc
diff --git a/quad/vivado_workspace/quad_hw.tcl b/quad/vivado_workspace/quad_hw.tcl
new file mode 100644
index 000000000..a5439c87e
--- /dev/null
+++ b/quad/vivado_workspace/quad_hw.tcl
@@ -0,0 +1,1078 @@
+#*****************************************************************************************
+# Vivado (TM) v2018.2.1 (64-bit)
+#
+# quad_hw.tcl: Tcl script for re-creating project 'quad_hw'
+#
+# Generated by Vivado on Fri Oct 05 16:26:16 CDT 2018
+# IP Build 2289599 on Thu Jul 26 21:09:20 MDT 2018
+#
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+# original project, however they will not be launched automatically. To regenerate the
+# run results please launch the synthesis/implementation runs as needed.
+#
+#*****************************************************************************************
+# NOTE: In order to use this script for source control purposes, please make sure that the
+# following files are added to the source control system:-
+#
+# 1. This project restoration tcl script (quad_hw.tcl) that was generated.
+#
+# 2. The following source(s) files that were local or imported into the original project.
+# (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
+#
+# "/local/ucart/MicroCART/quad/vivado_workspace/quad_hw/quad_hw.srcs/sources_1/bd/design_1/hdl/design_1_wrapper.vhd"
+# "/local/ucart/MicroCART/quad/vivado_workspace/quad_hw/src/constrs/Zybo-Z7-Master.xdc"
+#
+# 3. The following remote source files that were added to the original project:-
+#
+# <none>
+#
+#*****************************************************************************************
+
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set origin_dir "."
+
+# Use origin directory path location variable, if specified in the tcl shell
+if { [info exists ::origin_dir_loc] } {
+ set origin_dir $::origin_dir_loc
+}
+
+# Set the project name
+set _xil_proj_name_ "quad_hw"
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+ set _xil_proj_name_ $::user_project_name
+}
+
+variable script_file
+set script_file "quad_hw.tcl"
+
+# Help information for this script
+proc help {} {
+ variable script_file
+ puts "\nDescription:"
+ puts "Recreate a Vivado project from this script. The created project will be"
+ puts "functionally equivalent to the original project for which this script was"
+ puts "generated. The script contains commands for creating a project, filesets,"
+ puts "runs, adding/importing sources and setting properties on various objects.\n"
+ puts "Syntax:"
+ puts "$script_file"
+ puts "$script_file -tclargs \[--origin_dir <path>\]"
+ puts "$script_file -tclargs \[--project_name <name>\]"
+ puts "$script_file -tclargs \[--help\]\n"
+ puts "Usage:"
+ puts "Name Description"
+ puts "-------------------------------------------------------------------------"
+ puts "\[--origin_dir <path>\] Determine source file paths wrt this path. Default"
+ puts " origin_dir path value is \".\", otherwise, the value"
+ puts " that was set with the \"-paths_relative_to\" switch"
+ puts " when this script was generated.\n"
+ puts "\[--project_name <name>\] Create project with the specified name. Default"
+ puts " name is the name of the project from where this"
+ puts " script was generated.\n"
+ puts "\[--help\] Print help information for this script"
+ puts "-------------------------------------------------------------------------\n"
+ exit 0
+}
+
+if { $::argc > 0 } {
+ for {set i 0} {$i < $::argc} {incr i} {
+ set option [string trim [lindex $::argv $i]]
+ switch -regexp -- $option {
+ "--origin_dir" { incr i; set origin_dir [lindex $::argv $i] }
+ "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
+ "--help" { help }
+ default {
+ if { [regexp {^-} $option] } {
+ puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+ return 1
+ }
+ }
+ }
+ }
+}
+
+# Set the directory path for the original project from where this script was exported
+set orig_proj_dir "[file normalize "$origin_dir/quad_hw"]"
+
+# Create project
+create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xc7z020clg400-1
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Reconstruct message rules
+# None
+
+# Set project properties
+set obj [current_project]
+set_property -name "board_part" -value "digilentinc.com:zybo-z7-20:part0:1.0" -objects $obj
+set_property -name "board_part_repo_paths" -value "/local/ucart/MicroCART/quad/vivado_workspace/vivado-boards-master/new/board_files" -objects $obj
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "dsa.accelerator_binary_content" -value "bitstream" -objects $obj
+set_property -name "dsa.accelerator_binary_format" -value "xclbin2" -objects $obj
+set_property -name "dsa.board_id" -value "zybo-z7-20" -objects $obj
+set_property -name "dsa.description" -value "Vivado generated DSA" -objects $obj
+set_property -name "dsa.dr_bd_base_address" -value "0" -objects $obj
+set_property -name "dsa.emu_dir" -value "emu" -objects $obj
+set_property -name "dsa.flash_interface_type" -value "bpix16" -objects $obj
+set_property -name "dsa.flash_offset_address" -value "0" -objects $obj
+set_property -name "dsa.flash_size" -value "1024" -objects $obj
+set_property -name "dsa.host_architecture" -value "x86_64" -objects $obj
+set_property -name "dsa.host_interface" -value "pcie" -objects $obj
+set_property -name "dsa.num_compute_units" -value "60" -objects $obj
+set_property -name "dsa.platform_state" -value "pre_synth" -objects $obj
+set_property -name "dsa.uses_pr" -value "1" -objects $obj
+set_property -name "dsa.vendor" -value "xilinx" -objects $obj
+set_property -name "dsa.version" -value "0.0" -objects $obj
+set_property -name "enable_vhdl_2008" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
+set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
+set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+set_property -name "source_mgmt_mode" -value "DisplayOnly" -objects $obj
+set_property -name "target_language" -value "VHDL" -objects $obj
+set_property -name "webtalk.activehdl_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.ies_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.modelsim_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.questa_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.riviera_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.vcs_export_sim" -value "1" -objects $obj
+set_property -name "webtalk.xsim_export_sim" -value "1" -objects $obj
+set_property -name "xpm_libraries" -value "XPM_CDC XPM_FIFO XPM_MEMORY" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+ create_fileset -srcset sources_1
+}
+
+# Set IP repository paths
+set obj [get_filesets sources_1]
+set_property "ip_repo_paths" "[file normalize "$origin_dir/../ip_repo"]" $obj
+
+# Rebuild user ip_repo's index before adding any source files
+update_ip_catalog -rebuild
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+# Import local files from the original project
+set files [list \
+ [file normalize "${origin_dir}/quad_hw/quad_hw.srcs/sources_1/bd/design_1/hdl/design_1_wrapper.vhd" ]\
+]
+set imported_files [import_files -fileset sources_1 $files]
+
+# Set 'sources_1' fileset file properties for remote files
+# None
+
+# Set 'sources_1' fileset file properties for local files
+set file "hdl/design_1_wrapper.vhd"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "design_1_wrapper" -objects $obj
+set_property -name "top_auto_set" -value "0" -objects $obj
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+ create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/quad_hw/src/constrs/Zybo-Z7-Master.xdc"]"
+set file_imported [import_files -fileset constrs_1 [list $file]]
+set file "constrs/Zybo-Z7-Master.xdc"
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+ create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+# Empty (no sources present)
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "top" -value "design_1_wrapper" -objects $obj
+set_property -name "top_auto_set" -value "0" -objects $obj
+set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
+
+
+# Adding sources referenced in BDs, if not already added
+
+
+# Proc to create BD design_1
+proc cr_bd_design_1 { parentCell } {
+
+ # CHANGE DESIGN NAME HERE
+ set design_name design_1
+
+ common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
+
+ create_bd_design $design_name
+
+ set bCheckIPsPassed 1
+ ##################################################################
+ # CHECK IPs
+ ##################################################################
+ set bCheckIPs 1
+ if { $bCheckIPs == 1 } {
+ set list_check_ips "\
+ xilinx.com:ip:axi_gpio:2.0\
+ xilinx.com:ip:processing_system7:5.5\
+ xilinx.com:ip:proc_sys_reset:5.0\
+ "
+
+ set list_ips_missing ""
+ common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
+
+ foreach ip_vlnv $list_check_ips {
+ set ip_obj [get_ipdefs -all $ip_vlnv]
+ if { $ip_obj eq "" } {
+ lappend list_ips_missing $ip_vlnv
+ }
+ }
+
+ if { $list_ips_missing ne "" } {
+ catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
+ set bCheckIPsPassed 0
+ }
+
+ }
+
+ if { $bCheckIPsPassed != 1 } {
+ common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
+ return 3
+ }
+
+ variable script_folder
+
+ if { $parentCell eq "" } {
+ set parentCell [get_bd_cells /]
+ }
+
+ # Get object for parentCell
+ set parentObj [get_bd_cells $parentCell]
+ if { $parentObj == "" } {
+ catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
+ return
+ }
+
+ # Make sure parentObj is hier blk
+ set parentType [get_property TYPE $parentObj]
+ if { $parentType ne "hier" } {
+ catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
+ return
+ }
+
+ # Save current instance; Restore later
+ set oldCurInst [current_bd_instance .]
+
+ # Set parent object as current
+ current_bd_instance $parentObj
+
+
+ # Create interface ports
+ set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
+ set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]
+ set btns_4bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 btns_4bits ]
+ set leds_4bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 leds_4bits ]
+ set rgb_led [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 rgb_led ]
+ set sws_4bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 sws_4bits ]
+
+ # Create ports
+
+ # Create instance: axi_gpio_0, and set properties
+ set axi_gpio_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_0 ]
+ set_property -dict [ list \
+ CONFIG.GPIO_BOARD_INTERFACE {sws_4bits} \
+ CONFIG.USE_BOARD_FLOW {true} \
+ ] $axi_gpio_0
+
+ # Create instance: axi_gpio_1, and set properties
+ set axi_gpio_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_1 ]
+ set_property -dict [ list \
+ CONFIG.GPIO_BOARD_INTERFACE {leds_4bits} \
+ CONFIG.USE_BOARD_FLOW {true} \
+ ] $axi_gpio_1
+
+ # Create instance: axi_gpio_2, and set properties
+ set axi_gpio_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_2 ]
+ set_property -dict [ list \
+ CONFIG.GPIO_BOARD_INTERFACE {btns_4bits} \
+ CONFIG.USE_BOARD_FLOW {true} \
+ ] $axi_gpio_2
+
+ # Create instance: axi_gpio_3, and set properties
+ set axi_gpio_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_3 ]
+ set_property -dict [ list \
+ CONFIG.GPIO_BOARD_INTERFACE {rgb_led} \
+ CONFIG.USE_BOARD_FLOW {true} \
+ ] $axi_gpio_3
+
+ # Create instance: processing_system7_0, and set properties
+ set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]
+ set_property -dict [ list \
+ CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {666.666687} \
+ CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.158730} \
+ CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {125.000000} \
+ CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {50.000000} \
+ CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
+ CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
+ CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {50.000000} \
+ CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {10.000000} \
+ CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
+ CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
+ CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {111.111115} \
+ CONFIG.PCW_APU_CLK_RATIO_ENABLE {6:2:1} \
+ CONFIG.PCW_APU_PERIPHERAL_FREQMHZ {667} \
+ CONFIG.PCW_ARMPLL_CTRL_FBDIV {40} \
+ CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_CLK0_FREQ {50000000} \
+ CONFIG.PCW_CLK1_FREQ {10000000} \
+ CONFIG.PCW_CLK2_FREQ {10000000} \
+ CONFIG.PCW_CLK3_FREQ {10000000} \
+ CONFIG.PCW_CPU_CPU_6X4X_MAX_RANGE {667} \
+ CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1333.333} \
+ CONFIG.PCW_CPU_PERIPHERAL_CLKSRC {ARM PLL} \
+ CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
+ CONFIG.PCW_CRYSTAL_PERIPHERAL_FREQMHZ {33.333333} \
+ CONFIG.PCW_DCI_PERIPHERAL_CLKSRC {DDR PLL} \
+ CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {15} \
+ CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {7} \
+ CONFIG.PCW_DCI_PERIPHERAL_FREQMHZ {10.159} \
+ CONFIG.PCW_DDRPLL_CTRL_FBDIV {32} \
+ CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1066.667} \
+ CONFIG.PCW_DDR_HPRLPR_QUEUE_PARTITION {HPR(0)/LPR(32)} \
+ CONFIG.PCW_DDR_HPR_TO_CRITICAL_PRIORITY_LEVEL {15} \
+ CONFIG.PCW_DDR_LPR_TO_CRITICAL_PRIORITY_LEVEL {2} \
+ CONFIG.PCW_DDR_PERIPHERAL_CLKSRC {DDR PLL} \
+ CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {2} \
+ CONFIG.PCW_DDR_PORT0_HPR_ENABLE {0} \
+ CONFIG.PCW_DDR_PORT1_HPR_ENABLE {0} \
+ CONFIG.PCW_DDR_PORT2_HPR_ENABLE {0} \
+ CONFIG.PCW_DDR_PORT3_HPR_ENABLE {0} \
+ CONFIG.PCW_DDR_RAM_HIGHADDR {0x3FFFFFFF} \
+ CONFIG.PCW_DDR_WRITE_TO_CRITICAL_PRIORITY_LEVEL {2} \
+ CONFIG.PCW_ENET0_ENET0_IO {MIO 16 .. 27} \
+ CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {1} \
+ CONFIG.PCW_ENET0_GRP_MDIO_IO {MIO 52 .. 53} \
+ CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {8} \
+ CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {1} \
+ CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
+ CONFIG.PCW_ENET0_RESET_ENABLE {0} \
+ CONFIG.PCW_ENET1_GRP_MDIO_ENABLE {0} \
+ CONFIG.PCW_ENET1_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {0} \
+ CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {1000 Mbps} \
+ CONFIG.PCW_ENET1_RESET_ENABLE {0} \
+ CONFIG.PCW_ENET_RESET_ENABLE {1} \
+ CONFIG.PCW_ENET_RESET_POLARITY {Active Low} \
+ CONFIG.PCW_ENET_RESET_SELECT {Share reset pin} \
+ CONFIG.PCW_EN_4K_TIMER {0} \
+ CONFIG.PCW_EN_ENET0 {1} \
+ CONFIG.PCW_EN_GPIO {1} \
+ CONFIG.PCW_EN_QSPI {1} \
+ CONFIG.PCW_EN_SDIO0 {1} \
+ CONFIG.PCW_EN_UART1 {1} \
+ CONFIG.PCW_EN_USB0 {1} \
+ CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {5} \
+ CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {4} \
+ CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
+ CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
+ CONFIG.PCW_FPGA_FCLK1_ENABLE {0} \
+ CONFIG.PCW_FPGA_FCLK2_ENABLE {0} \
+ CONFIG.PCW_FPGA_FCLK3_ENABLE {0} \
+ CONFIG.PCW_GPIO_MIO_GPIO_ENABLE {1} \
+ CONFIG.PCW_GPIO_MIO_GPIO_IO {MIO} \
+ CONFIG.PCW_GPIO_PERIPHERAL_ENABLE {0} \
+ CONFIG.PCW_I2C0_RESET_ENABLE {0} \
+ CONFIG.PCW_I2C1_RESET_ENABLE {0} \
+ CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {25} \
+ CONFIG.PCW_I2C_RESET_ENABLE {1} \
+ CONFIG.PCW_IOPLL_CTRL_FBDIV {30} \
+ CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} \
+ CONFIG.PCW_IRQ_F2P_MODE {DIRECT} \
+ CONFIG.PCW_MIO_0_DIRECTION {inout} \
+ CONFIG.PCW_MIO_0_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_0_PULLUP {enabled} \
+ CONFIG.PCW_MIO_0_SLEW {slow} \
+ CONFIG.PCW_MIO_10_DIRECTION {inout} \
+ CONFIG.PCW_MIO_10_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_10_PULLUP {enabled} \
+ CONFIG.PCW_MIO_10_SLEW {slow} \
+ CONFIG.PCW_MIO_11_DIRECTION {inout} \
+ CONFIG.PCW_MIO_11_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_11_PULLUP {enabled} \
+ CONFIG.PCW_MIO_11_SLEW {slow} \
+ CONFIG.PCW_MIO_12_DIRECTION {inout} \
+ CONFIG.PCW_MIO_12_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_12_PULLUP {enabled} \
+ CONFIG.PCW_MIO_12_SLEW {slow} \
+ CONFIG.PCW_MIO_13_DIRECTION {inout} \
+ CONFIG.PCW_MIO_13_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_13_PULLUP {enabled} \
+ CONFIG.PCW_MIO_13_SLEW {slow} \
+ CONFIG.PCW_MIO_14_DIRECTION {inout} \
+ CONFIG.PCW_MIO_14_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_14_PULLUP {enabled} \
+ CONFIG.PCW_MIO_14_SLEW {slow} \
+ CONFIG.PCW_MIO_15_DIRECTION {inout} \
+ CONFIG.PCW_MIO_15_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_15_PULLUP {enabled} \
+ CONFIG.PCW_MIO_15_SLEW {slow} \
+ CONFIG.PCW_MIO_16_DIRECTION {out} \
+ CONFIG.PCW_MIO_16_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_16_PULLUP {enabled} \
+ CONFIG.PCW_MIO_16_SLEW {fast} \
+ CONFIG.PCW_MIO_17_DIRECTION {out} \
+ CONFIG.PCW_MIO_17_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_17_PULLUP {enabled} \
+ CONFIG.PCW_MIO_17_SLEW {fast} \
+ CONFIG.PCW_MIO_18_DIRECTION {out} \
+ CONFIG.PCW_MIO_18_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_18_PULLUP {enabled} \
+ CONFIG.PCW_MIO_18_SLEW {fast} \
+ CONFIG.PCW_MIO_19_DIRECTION {out} \
+ CONFIG.PCW_MIO_19_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_19_PULLUP {enabled} \
+ CONFIG.PCW_MIO_19_SLEW {fast} \
+ CONFIG.PCW_MIO_1_DIRECTION {out} \
+ CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_1_PULLUP {enabled} \
+ CONFIG.PCW_MIO_1_SLEW {slow} \
+ CONFIG.PCW_MIO_20_DIRECTION {out} \
+ CONFIG.PCW_MIO_20_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_20_PULLUP {enabled} \
+ CONFIG.PCW_MIO_20_SLEW {fast} \
+ CONFIG.PCW_MIO_21_DIRECTION {out} \
+ CONFIG.PCW_MIO_21_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_21_PULLUP {enabled} \
+ CONFIG.PCW_MIO_21_SLEW {fast} \
+ CONFIG.PCW_MIO_22_DIRECTION {in} \
+ CONFIG.PCW_MIO_22_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_22_PULLUP {enabled} \
+ CONFIG.PCW_MIO_22_SLEW {fast} \
+ CONFIG.PCW_MIO_23_DIRECTION {in} \
+ CONFIG.PCW_MIO_23_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_23_PULLUP {enabled} \
+ CONFIG.PCW_MIO_23_SLEW {fast} \
+ CONFIG.PCW_MIO_24_DIRECTION {in} \
+ CONFIG.PCW_MIO_24_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_24_PULLUP {enabled} \
+ CONFIG.PCW_MIO_24_SLEW {fast} \
+ CONFIG.PCW_MIO_25_DIRECTION {in} \
+ CONFIG.PCW_MIO_25_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_25_PULLUP {enabled} \
+ CONFIG.PCW_MIO_25_SLEW {fast} \
+ CONFIG.PCW_MIO_26_DIRECTION {in} \
+ CONFIG.PCW_MIO_26_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_26_PULLUP {enabled} \
+ CONFIG.PCW_MIO_26_SLEW {fast} \
+ CONFIG.PCW_MIO_27_DIRECTION {in} \
+ CONFIG.PCW_MIO_27_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_27_PULLUP {enabled} \
+ CONFIG.PCW_MIO_27_SLEW {fast} \
+ CONFIG.PCW_MIO_28_DIRECTION {inout} \
+ CONFIG.PCW_MIO_28_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_28_PULLUP {enabled} \
+ CONFIG.PCW_MIO_28_SLEW {fast} \
+ CONFIG.PCW_MIO_29_DIRECTION {in} \
+ CONFIG.PCW_MIO_29_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_29_PULLUP {enabled} \
+ CONFIG.PCW_MIO_29_SLEW {fast} \
+ CONFIG.PCW_MIO_2_DIRECTION {inout} \
+ CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_2_PULLUP {disabled} \
+ CONFIG.PCW_MIO_2_SLEW {slow} \
+ CONFIG.PCW_MIO_30_DIRECTION {out} \
+ CONFIG.PCW_MIO_30_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_30_PULLUP {enabled} \
+ CONFIG.PCW_MIO_30_SLEW {fast} \
+ CONFIG.PCW_MIO_31_DIRECTION {in} \
+ CONFIG.PCW_MIO_31_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_31_PULLUP {enabled} \
+ CONFIG.PCW_MIO_31_SLEW {fast} \
+ CONFIG.PCW_MIO_32_DIRECTION {inout} \
+ CONFIG.PCW_MIO_32_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_32_PULLUP {enabled} \
+ CONFIG.PCW_MIO_32_SLEW {fast} \
+ CONFIG.PCW_MIO_33_DIRECTION {inout} \
+ CONFIG.PCW_MIO_33_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_33_PULLUP {enabled} \
+ CONFIG.PCW_MIO_33_SLEW {fast} \
+ CONFIG.PCW_MIO_34_DIRECTION {inout} \
+ CONFIG.PCW_MIO_34_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_34_PULLUP {enabled} \
+ CONFIG.PCW_MIO_34_SLEW {fast} \
+ CONFIG.PCW_MIO_35_DIRECTION {inout} \
+ CONFIG.PCW_MIO_35_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_35_PULLUP {enabled} \
+ CONFIG.PCW_MIO_35_SLEW {fast} \
+ CONFIG.PCW_MIO_36_DIRECTION {in} \
+ CONFIG.PCW_MIO_36_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_36_PULLUP {enabled} \
+ CONFIG.PCW_MIO_36_SLEW {fast} \
+ CONFIG.PCW_MIO_37_DIRECTION {inout} \
+ CONFIG.PCW_MIO_37_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_37_PULLUP {enabled} \
+ CONFIG.PCW_MIO_37_SLEW {fast} \
+ CONFIG.PCW_MIO_38_DIRECTION {inout} \
+ CONFIG.PCW_MIO_38_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_38_PULLUP {enabled} \
+ CONFIG.PCW_MIO_38_SLEW {fast} \
+ CONFIG.PCW_MIO_39_DIRECTION {inout} \
+ CONFIG.PCW_MIO_39_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_39_PULLUP {enabled} \
+ CONFIG.PCW_MIO_39_SLEW {fast} \
+ CONFIG.PCW_MIO_3_DIRECTION {inout} \
+ CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_3_PULLUP {disabled} \
+ CONFIG.PCW_MIO_3_SLEW {slow} \
+ CONFIG.PCW_MIO_40_DIRECTION {inout} \
+ CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_40_PULLUP {enabled} \
+ CONFIG.PCW_MIO_40_SLEW {slow} \
+ CONFIG.PCW_MIO_41_DIRECTION {inout} \
+ CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_41_PULLUP {enabled} \
+ CONFIG.PCW_MIO_41_SLEW {slow} \
+ CONFIG.PCW_MIO_42_DIRECTION {inout} \
+ CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_42_PULLUP {enabled} \
+ CONFIG.PCW_MIO_42_SLEW {slow} \
+ CONFIG.PCW_MIO_43_DIRECTION {inout} \
+ CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_43_PULLUP {enabled} \
+ CONFIG.PCW_MIO_43_SLEW {slow} \
+ CONFIG.PCW_MIO_44_DIRECTION {inout} \
+ CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_44_PULLUP {enabled} \
+ CONFIG.PCW_MIO_44_SLEW {slow} \
+ CONFIG.PCW_MIO_45_DIRECTION {inout} \
+ CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_45_PULLUP {enabled} \
+ CONFIG.PCW_MIO_45_SLEW {slow} \
+ CONFIG.PCW_MIO_46_DIRECTION {out} \
+ CONFIG.PCW_MIO_46_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_46_PULLUP {enabled} \
+ CONFIG.PCW_MIO_46_SLEW {slow} \
+ CONFIG.PCW_MIO_47_DIRECTION {in} \
+ CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_47_PULLUP {enabled} \
+ CONFIG.PCW_MIO_47_SLEW {slow} \
+ CONFIG.PCW_MIO_48_DIRECTION {out} \
+ CONFIG.PCW_MIO_48_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_48_PULLUP {enabled} \
+ CONFIG.PCW_MIO_48_SLEW {slow} \
+ CONFIG.PCW_MIO_49_DIRECTION {in} \
+ CONFIG.PCW_MIO_49_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_49_PULLUP {enabled} \
+ CONFIG.PCW_MIO_49_SLEW {slow} \
+ CONFIG.PCW_MIO_4_DIRECTION {inout} \
+ CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_4_PULLUP {disabled} \
+ CONFIG.PCW_MIO_4_SLEW {slow} \
+ CONFIG.PCW_MIO_50_DIRECTION {inout} \
+ CONFIG.PCW_MIO_50_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_50_PULLUP {enabled} \
+ CONFIG.PCW_MIO_50_SLEW {slow} \
+ CONFIG.PCW_MIO_51_DIRECTION {inout} \
+ CONFIG.PCW_MIO_51_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_51_PULLUP {enabled} \
+ CONFIG.PCW_MIO_51_SLEW {slow} \
+ CONFIG.PCW_MIO_52_DIRECTION {out} \
+ CONFIG.PCW_MIO_52_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_52_PULLUP {enabled} \
+ CONFIG.PCW_MIO_52_SLEW {slow} \
+ CONFIG.PCW_MIO_53_DIRECTION {inout} \
+ CONFIG.PCW_MIO_53_IOTYPE {LVCMOS 1.8V} \
+ CONFIG.PCW_MIO_53_PULLUP {enabled} \
+ CONFIG.PCW_MIO_53_SLEW {slow} \
+ CONFIG.PCW_MIO_5_DIRECTION {inout} \
+ CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_5_PULLUP {disabled} \
+ CONFIG.PCW_MIO_5_SLEW {slow} \
+ CONFIG.PCW_MIO_6_DIRECTION {out} \
+ CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_6_PULLUP {disabled} \
+ CONFIG.PCW_MIO_6_SLEW {slow} \
+ CONFIG.PCW_MIO_7_DIRECTION {out} \
+ CONFIG.PCW_MIO_7_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_7_PULLUP {disabled} \
+ CONFIG.PCW_MIO_7_SLEW {slow} \
+ CONFIG.PCW_MIO_8_DIRECTION {out} \
+ CONFIG.PCW_MIO_8_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_8_PULLUP {disabled} \
+ CONFIG.PCW_MIO_8_SLEW {slow} \
+ CONFIG.PCW_MIO_9_DIRECTION {inout} \
+ CONFIG.PCW_MIO_9_IOTYPE {LVCMOS 3.3V} \
+ CONFIG.PCW_MIO_9_PULLUP {enabled} \
+ CONFIG.PCW_MIO_9_SLEW {slow} \
+ CONFIG.PCW_MIO_TREE_PERIPHERALS {GPIO#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#GPIO#Quad SPI Flash#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#GPIO#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#USB Reset#SD 0#UART 1#UART 1#GPIO#GPIO#Enet 0#Enet 0} \
+ CONFIG.PCW_MIO_TREE_SIGNALS {gpio[0]#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]/HOLD_B#qspi0_sclk#gpio[7]#qspi_fbclk#gpio[9]#gpio[10]#gpio[11]#gpio[12]#gpio[13]#gpio[14]#gpio[15]#tx_clk#txd[0]#txd[1]#txd[2]#txd[3]#tx_ctl#rx_clk#rxd[0]#rxd[1]#rxd[2]#rxd[3]#rx_ctl#data[4]#dir#stp#nxt#data[0]#data[1]#data[2]#data[3]#clk#data[5]#data[6]#data[7]#clk#cmd#data[0]#data[1]#data[2]#data[3]#reset#cd#tx#rx#gpio[50]#gpio[51]#mdc#mdio} \
+ CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
+ CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
+ CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
+ CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
+ CONFIG.PCW_OVERRIDE_BASIC_CLOCK {0} \
+ CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY0 {0.221} \
+ CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY1 {0.222} \
+ CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY2 {0.217} \
+ CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY3 {0.244} \
+ CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0 {-0.050} \
+ CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1 {-0.044} \
+ CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2 {-0.035} \
+ CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3 {-0.100} \
+ CONFIG.PCW_PCAP_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {5} \
+ CONFIG.PCW_PCAP_PERIPHERAL_FREQMHZ {200} \
+ CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
+ CONFIG.PCW_PLL_BYPASSMODE_ENABLE {0} \
+ CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 3.3V} \
+ CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
+ CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {1} \
+ CONFIG.PCW_QSPI_GRP_FBCLK_IO {MIO 8} \
+ CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
+ CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
+ CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
+ CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
+ CONFIG.PCW_QSPI_INTERNAL_HIGHADDRESS {0xFCFFFFFF} \
+ CONFIG.PCW_QSPI_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {5} \
+ CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
+ CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
+ CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
+ CONFIG.PCW_SD0_GRP_CD_ENABLE {1} \
+ CONFIG.PCW_SD0_GRP_CD_IO {MIO 47} \
+ CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
+ CONFIG.PCW_SD0_GRP_WP_ENABLE {0} \
+ CONFIG.PCW_SD0_PERIPHERAL_ENABLE {1} \
+ CONFIG.PCW_SD0_SD0_IO {MIO 40 .. 45} \
+ CONFIG.PCW_SDIO_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {20} \
+ CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {50} \
+ CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
+ CONFIG.PCW_SINGLE_QSPI_DATA_MODE {x4} \
+ CONFIG.PCW_SMC_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_SMC_PERIPHERAL_FREQMHZ {100} \
+ CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_TPIU_PERIPHERAL_CLKSRC {External} \
+ CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
+ CONFIG.PCW_TPIU_PERIPHERAL_FREQMHZ {200} \
+ CONFIG.PCW_UART1_BAUD_RATE {115200} \
+ CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
+ CONFIG.PCW_UART1_PERIPHERAL_ENABLE {1} \
+ CONFIG.PCW_UART1_UART1_IO {MIO 48 .. 49} \
+ CONFIG.PCW_UART_PERIPHERAL_CLKSRC {IO PLL} \
+ CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {10} \
+ CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
+ CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
+ CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {533.333374} \
+ CONFIG.PCW_UIPARAM_DDR_ADV_ENABLE {0} \
+ CONFIG.PCW_UIPARAM_DDR_AL {0} \
+ CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
+ CONFIG.PCW_UIPARAM_DDR_BL {8} \
+ CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY0 {0.221} \
+ CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY1 {0.222} \
+ CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY2 {0.217} \
+ CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY3 {0.244} \
+ CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {32 Bit} \
+ CONFIG.PCW_UIPARAM_DDR_CL {7} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM {18.8} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH {80.4535} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM {18.8} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH {80.4535} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM {18.8} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH {80.4535} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM {18.8} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH {80.4535} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_CLOCK_STOP_EN {0} \
+ CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
+ CONFIG.PCW_UIPARAM_DDR_CWL {6} \
+ CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_0_LENGTH_MM {22.8} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH {105.056} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_1_LENGTH_MM {27.9} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH {66.904} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_2_LENGTH_MM {22.9} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH {89.1715} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_3_LENGTH_MM {29.4} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH {113.63} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 {-0.050} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 {-0.044} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 {-0.035} \
+ CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 {-0.100} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_0_LENGTH_MM {22.8} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH {98.503} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_1_LENGTH_MM {27.9} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH {68.5855} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_2_LENGTH_MM {22.9} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH {90.295} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_3_LENGTH_MM {29.4} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH {103.977} \
+ CONFIG.PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY {160} \
+ CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
+ CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
+ CONFIG.PCW_UIPARAM_DDR_ENABLE {1} \
+ CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {533.333333} \
+ CONFIG.PCW_UIPARAM_DDR_HIGH_TEMP {Normal (0-85)} \
+ CONFIG.PCW_UIPARAM_DDR_MEMORY_TYPE {DDR 3 (Low Voltage)} \
+ CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41K256M16 RE-125} \
+ CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
+ CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
+ CONFIG.PCW_UIPARAM_DDR_TRAIN_DATA_EYE {1} \
+ CONFIG.PCW_UIPARAM_DDR_TRAIN_READ_GATE {1} \
+ CONFIG.PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL {1} \
+ CONFIG.PCW_UIPARAM_DDR_T_FAW {40.0} \
+ CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {35.0} \
+ CONFIG.PCW_UIPARAM_DDR_T_RC {48.75} \
+ CONFIG.PCW_UIPARAM_DDR_T_RCD {7} \
+ CONFIG.PCW_UIPARAM_DDR_T_RP {7} \
+ CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {0} \
+ CONFIG.PCW_USB0_PERIPHERAL_ENABLE {1} \
+ CONFIG.PCW_USB0_PERIPHERAL_FREQMHZ {60} \
+ CONFIG.PCW_USB0_RESET_ENABLE {1} \
+ CONFIG.PCW_USB0_RESET_IO {MIO 46} \
+ CONFIG.PCW_USB0_USB0_IO {MIO 28 .. 39} \
+ CONFIG.PCW_USB1_RESET_ENABLE {0} \
+ CONFIG.PCW_USB_RESET_ENABLE {1} \
+ CONFIG.PCW_USB_RESET_POLARITY {Active Low} \
+ CONFIG.PCW_USB_RESET_SELECT {Share reset pin} \
+ CONFIG.PCW_USE_AXI_NONSECURE {0} \
+ CONFIG.PCW_USE_CROSS_TRIGGER {0} \
+ CONFIG.PCW_USE_M_AXI_GP0 {1} \
+ ] $processing_system7_0
+
+ # Create instance: ps7_0_axi_periph, and set properties
+ set ps7_0_axi_periph [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 ps7_0_axi_periph ]
+ set_property -dict [ list \
+ CONFIG.NUM_MI {5} \
+ ] $ps7_0_axi_periph
+
+ # Create instance: rst_ps7_0_50M, and set properties
+ set rst_ps7_0_50M [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 rst_ps7_0_50M ]
+
+ # Create interface connections
+ connect_bd_intf_net -intf_net axi_gpio_0_GPIO [get_bd_intf_ports sws_4bits] [get_bd_intf_pins axi_gpio_0/GPIO]
+ connect_bd_intf_net -intf_net axi_gpio_1_GPIO [get_bd_intf_ports leds_4bits] [get_bd_intf_pins axi_gpio_1/GPIO]
+ connect_bd_intf_net -intf_net axi_gpio_2_GPIO [get_bd_intf_ports btns_4bits] [get_bd_intf_pins axi_gpio_2/GPIO]
+ connect_bd_intf_net -intf_net axi_gpio_3_GPIO [get_bd_intf_ports rgb_led] [get_bd_intf_pins axi_gpio_3/GPIO]
+ connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins processing_system7_0/DDR]
+ connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_ports FIXED_IO] [get_bd_intf_pins processing_system7_0/FIXED_IO]
+ connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins processing_system7_0/M_AXI_GP0] [get_bd_intf_pins ps7_0_axi_periph/S00_AXI]
+ connect_bd_intf_net -intf_net ps7_0_axi_periph_M00_AXI [get_bd_intf_pins axi_gpio_0/S_AXI] [get_bd_intf_pins ps7_0_axi_periph/M00_AXI]
+ connect_bd_intf_net -intf_net ps7_0_axi_periph_M01_AXI [get_bd_intf_pins axi_gpio_1/S_AXI] [get_bd_intf_pins ps7_0_axi_periph/M01_AXI]
+ connect_bd_intf_net -intf_net ps7_0_axi_periph_M02_AXI [get_bd_intf_pins axi_gpio_2/S_AXI] [get_bd_intf_pins ps7_0_axi_periph/M02_AXI]
+ connect_bd_intf_net -intf_net ps7_0_axi_periph_M03_AXI [get_bd_intf_pins axi_gpio_3/S_AXI] [get_bd_intf_pins ps7_0_axi_periph/M03_AXI]
+
+ # Create port connections
+ connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins axi_gpio_0/s_axi_aclk] [get_bd_pins axi_gpio_1/s_axi_aclk] [get_bd_pins axi_gpio_2/s_axi_aclk] [get_bd_pins axi_gpio_3/s_axi_aclk] [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK] [get_bd_pins ps7_0_axi_periph/ACLK] [get_bd_pins ps7_0_axi_periph/M00_ACLK] [get_bd_pins ps7_0_axi_periph/M01_ACLK] [get_bd_pins ps7_0_axi_periph/M02_ACLK] [get_bd_pins ps7_0_axi_periph/M03_ACLK] [get_bd_pins ps7_0_axi_periph/M04_ACLK] [get_bd_pins ps7_0_axi_periph/S00_ACLK] [get_bd_pins rst_ps7_0_50M/slowest_sync_clk]
+ connect_bd_net -net processing_system7_0_FCLK_RESET0_N [get_bd_pins processing_system7_0/FCLK_RESET0_N] [get_bd_pins rst_ps7_0_50M/ext_reset_in]
+ connect_bd_net -net rst_ps7_0_50M_interconnect_aresetn [get_bd_pins ps7_0_axi_periph/ARESETN] [get_bd_pins rst_ps7_0_50M/interconnect_aresetn]
+ connect_bd_net -net rst_ps7_0_50M_peripheral_aresetn [get_bd_pins axi_gpio_0/s_axi_aresetn] [get_bd_pins axi_gpio_1/s_axi_aresetn] [get_bd_pins axi_gpio_2/s_axi_aresetn] [get_bd_pins axi_gpio_3/s_axi_aresetn] [get_bd_pins ps7_0_axi_periph/M00_ARESETN] [get_bd_pins ps7_0_axi_periph/M01_ARESETN] [get_bd_pins ps7_0_axi_periph/M02_ARESETN] [get_bd_pins ps7_0_axi_periph/M03_ARESETN] [get_bd_pins ps7_0_axi_periph/M04_ARESETN] [get_bd_pins ps7_0_axi_periph/S00_ARESETN] [get_bd_pins rst_ps7_0_50M/peripheral_aresetn]
+
+ # Create address segments
+ create_bd_addr_seg -range 0x00010000 -offset 0x41200000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_gpio_0/S_AXI/Reg] SEG_axi_gpio_0_Reg
+ create_bd_addr_seg -range 0x00010000 -offset 0x41210000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_gpio_1/S_AXI/Reg] SEG_axi_gpio_1_Reg
+ create_bd_addr_seg -range 0x00010000 -offset 0x41220000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_gpio_2/S_AXI/Reg] SEG_axi_gpio_2_Reg
+ create_bd_addr_seg -range 0x00010000 -offset 0x41230000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_gpio_3/S_AXI/Reg] SEG_axi_gpio_3_Reg
+
+
+ # Restore current instance
+ current_bd_instance $oldCurInst
+
+ save_bd_design
+ close_bd_design $design_name
+}
+# End of cr_bd_design_1()
+cr_bd_design_1 ""
+set_property IS_MANAGED "0" [get_files design_1.bd ]
+set_property REGISTERED_WITH_MANAGER "1" [get_files design_1.bd ]
+set_property SYNTH_CHECKPOINT_MODE "Hierarchical" [get_files design_1.bd ]
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+ create_run -name synth_1 -part xc7z020clg400-1 -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+ set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+ set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+ create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+
+}
+set obj [get_runs synth_1]
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+ create_run -name impl_1 -part xc7z020clg400-1 -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+ set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+ set_property flow "Vivado Implementation 2018" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+ create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+ create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+ create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+ create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+ create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+ create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
+ create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+ create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
+ create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
+if { $obj != "" } {
+
+}
+set obj [get_runs impl_1]
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+
+puts "INFO: Project created:${_xil_proj_name_}"
diff --git a/quad/vivado_workspace/quad_hw/src/constrs/Zybo-Z7-Master.xdc b/quad/vivado_workspace/quad_hw/src/constrs/Zybo-Z7-Master.xdc
new file mode 100644
index 000000000..9e6546e42
--- /dev/null
+++ b/quad/vivado_workspace/quad_hw/src/constrs/Zybo-Z7-Master.xdc
@@ -0,0 +1,198 @@
+## This file is a general .xdc for the Zybo Z7 Rev. B
+## It is compatible with the Zybo Z7-20 and Zybo Z7-10
+## To use it in a project:
+## - uncomment the lines corresponding to used pins
+## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
+
+##Clock signal
+#set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 } [get_ports { sysclk }]; #IO_L12P_T1_MRCC_35 Sch=sysclk
+#create_clock -add -name sys_clk_pin -period 8.00 -waveform {0 4} [get_ports { sysclk }];
+
+
+##Switches
+#set_property -dict { PACKAGE_PIN G15 IOSTANDARD LVCMOS33 } [get_ports { sw[0] }]; #IO_L19N_T3_VREF_35 Sch=sw[0]
+#set_property -dict { PACKAGE_PIN P15 IOSTANDARD LVCMOS33 } [get_ports { sw[1] }]; #IO_L24P_T3_34 Sch=sw[1]
+#set_property -dict { PACKAGE_PIN W13 IOSTANDARD LVCMOS33 } [get_ports { sw[2] }]; #IO_L4N_T0_34 Sch=sw[2]
+#set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { sw[3] }]; #IO_L9P_T1_DQS_34 Sch=sw[3]
+
+
+##Buttons
+#set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 } [get_ports { btn[0] }]; #IO_L12N_T1_MRCC_35 Sch=btn[0]
+#set_property -dict { PACKAGE_PIN P16 IOSTANDARD LVCMOS33 } [get_ports { btn[1] }]; #IO_L24N_T3_34 Sch=btn[1]
+#set_property -dict { PACKAGE_PIN K19 IOSTANDARD LVCMOS33 } [get_ports { btn[2] }]; #IO_L10P_T1_AD11P_35 Sch=btn[2]
+#set_property -dict { PACKAGE_PIN Y16 IOSTANDARD LVCMOS33 } [get_ports { btn[3] }]; #IO_L7P_T1_34 Sch=btn[3]
+
+
+##LEDs
+#set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } [get_ports { led[0] }]; #IO_L23P_T3_35 Sch=led[0]
+#set_property -dict { PACKAGE_PIN M15 IOSTANDARD LVCMOS33 } [get_ports { led[1] }]; #IO_L23N_T3_35 Sch=led[1]
+#set_property -dict { PACKAGE_PIN G14 IOSTANDARD LVCMOS33 } [get_ports { led[2] }]; #IO_0_35 Sch=led[2]
+#set_property -dict { PACKAGE_PIN D18 IOSTANDARD LVCMOS33 } [get_ports { led[3] }]; #IO_L3N_T0_DQS_AD1N_35 Sch=led[3]
+
+
+##RGB LED 5 (Zybo Z7-20 only)
+#set_property -dict { PACKAGE_PIN Y11 IOSTANDARD LVCMOS33 } [get_ports { led5_r }]; #IO_L18N_T2_13 Sch=led5_r
+#set_property -dict { PACKAGE_PIN T5 IOSTANDARD LVCMOS33 } [get_ports { led5_g }]; #IO_L19P_T3_13 Sch=led5_g
+#set_property -dict { PACKAGE_PIN Y12 IOSTANDARD LVCMOS33 } [get_ports { led5_b }]; #IO_L20P_T3_13 Sch=led5_b
+
+##RGB LED 6
+#set_property -dict { PACKAGE_PIN V16 IOSTANDARD LVCMOS33 } [get_ports { led6_r }]; #IO_L18P_T2_34 Sch=led6_r
+#set_property -dict { PACKAGE_PIN F17 IOSTANDARD LVCMOS33 } [get_ports { led6_g }]; #IO_L6N_T0_VREF_35 Sch=led6_g
+#set_property -dict { PACKAGE_PIN M17 IOSTANDARD LVCMOS33 } [get_ports { led6_b }]; #IO_L8P_T1_AD10P_35 Sch=led6_b
+
+
+##Audio Codec
+#set_property -dict { PACKAGE_PIN R19 IOSTANDARD LVCMOS33 } [get_ports { ac_bclk }]; #IO_0_34 Sch=ac_bclk
+#set_property -dict { PACKAGE_PIN R17 IOSTANDARD LVCMOS33 } [get_ports { ac_mclk }]; #IO_L19N_T3_VREF_34 Sch=ac_mclk
+#set_property -dict { PACKAGE_PIN P18 IOSTANDARD LVCMOS33 } [get_ports { ac_muten }]; #IO_L23N_T3_34 Sch=ac_muten
+#set_property -dict { PACKAGE_PIN R18 IOSTANDARD LVCMOS33 } [get_ports { ac_pbdat }]; #IO_L20N_T3_34 Sch=ac_pbdat
+#set_property -dict { PACKAGE_PIN T19 IOSTANDARD LVCMOS33 } [get_ports { ac_pblrc }]; #IO_25_34 Sch=ac_pblrc
+#set_property -dict { PACKAGE_PIN R16 IOSTANDARD LVCMOS33 } [get_ports { ac_recdat }]; #IO_L19P_T3_34 Sch=ac_recdat
+#set_property -dict { PACKAGE_PIN Y18 IOSTANDARD LVCMOS33 } [get_ports { ac_reclrc }]; #IO_L17P_T2_34 Sch=ac_reclrc
+#set_property -dict { PACKAGE_PIN N18 IOSTANDARD LVCMOS33 } [get_ports { ac_scl }]; #IO_L13P_T2_MRCC_34 Sch=ac_scl
+#set_property -dict { PACKAGE_PIN N17 IOSTANDARD LVCMOS33 } [get_ports { ac_sda }]; #IO_L23P_T3_34 Sch=ac_sda
+
+
+##Additional Ethernet signals
+#set_property -dict { PACKAGE_PIN F16 IOSTANDARD LVCMOS33 PULLUP true } [get_ports { eth_int_pu_b }]; #IO_L6P_T0_35 Sch=eth_int_pu_b
+#set_property -dict { PACKAGE_PIN E17 IOSTANDARD LVCMOS33 } [get_ports { eth_rst_b }]; #IO_L3P_T0_DQS_AD1P_35 Sch=eth_rst_b
+
+
+##USB-OTG over-current detect pin
+#set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { otg_oc }]; #IO_L3P_T0_DQS_PUDC_B_34 Sch=otg_oc
+
+
+##Fan (Zybo Z7-20 only)
+#set_property -dict { PACKAGE_PIN Y13 IOSTANDARD LVCMOS33 PULLUP true } [get_ports { fan_fb_pu }]; #IO_L20N_T3_13 Sch=fan_fb_pu
+
+
+##HDMI RX
+#set_property -dict { PACKAGE_PIN W19 IOSTANDARD LVCMOS33 } [get_ports { hdmi_rx_hpd }]; #IO_L22N_T3_34 Sch=hdmi_rx_hpd
+#set_property -dict { PACKAGE_PIN W18 IOSTANDARD LVCMOS33 } [get_ports { hdmi_rx_scl }]; #IO_L22P_T3_34 Sch=hdmi_rx_scl
+#set_property -dict { PACKAGE_PIN Y19 IOSTANDARD LVCMOS33 } [get_ports { hdmi_rx_sda }]; #IO_L17N_T2_34 Sch=hdmi_rx_sda
+#set_property -dict { PACKAGE_PIN U19 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_clk_n }]; #IO_L12N_T1_MRCC_34 Sch=hdmi_rx_clk_n
+#set_property -dict { PACKAGE_PIN U18 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_clk_p }]; #IO_L12P_T1_MRCC_34 Sch=hdmi_rx_clk_p
+#set_property -dict { PACKAGE_PIN W20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_n[0] }]; #IO_L16N_T2_34 Sch=hdmi_rx_n[0]
+#set_property -dict { PACKAGE_PIN V20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_p[0] }]; #IO_L16P_T2_34 Sch=hdmi_rx_p[0]
+#set_property -dict { PACKAGE_PIN U20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_n[1] }]; #IO_L15N_T2_DQS_34 Sch=hdmi_rx_n[1]
+#set_property -dict { PACKAGE_PIN T20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_p[1] }]; #IO_L15P_T2_DQS_34 Sch=hdmi_rx_p[1]
+#set_property -dict { PACKAGE_PIN P20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_n[2] }]; #IO_L14N_T2_SRCC_34 Sch=hdmi_rx_n[2]
+#set_property -dict { PACKAGE_PIN N20 IOSTANDARD TMDS_33 } [get_ports { hdmi_rx_p[2] }]; #IO_L14P_T2_SRCC_34 Sch=hdmi_rx_p[2]
+
+##HDMI RX CEC (Zybo Z7-20 only)
+#set_property -dict { PACKAGE_PIN Y8 IOSTANDARD LVCMOS33 } [get_ports { hdmi_rx_cec }]; #IO_L14N_T2_SRCC_13 Sch=hdmi_rx_cec
+
+
+##HDMI TX
+#set_property -dict { PACKAGE_PIN E18 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_hpd }]; #IO_L5P_T0_AD9P_35 Sch=hdmi_tx_hpd
+#set_property -dict { PACKAGE_PIN G17 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_scl }]; #IO_L16P_T2_35 Sch=hdmi_tx_scl
+#set_property -dict { PACKAGE_PIN G18 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_sda }]; #IO_L16N_T2_35 Sch=hdmi_tx_sda
+#set_property -dict { PACKAGE_PIN H17 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_clk_n }]; #IO_L13N_T2_MRCC_35 Sch=hdmi_tx_clk_n
+#set_property -dict { PACKAGE_PIN H16 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_clk_p }]; #IO_L13P_T2_MRCC_35 Sch=hdmi_tx_clk_p
+#set_property -dict { PACKAGE_PIN D20 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_n[0] }]; #IO_L4N_T0_35 Sch=hdmi_tx_n[0]
+#set_property -dict { PACKAGE_PIN D19 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_p[0] }]; #IO_L4P_T0_35 Sch=hdmi_tx_p[0]
+#set_property -dict { PACKAGE_PIN B20 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_n[1] }]; #IO_L1N_T0_AD0N_35 Sch=hdmi_tx_n[1]
+#set_property -dict { PACKAGE_PIN C20 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_p[1] }]; #IO_L1P_T0_AD0P_35 Sch=hdmi_tx_p[1]
+#set_property -dict { PACKAGE_PIN A20 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_n[2] }]; #IO_L2N_T0_AD8N_35 Sch=hdmi_tx_n[2]
+#set_property -dict { PACKAGE_PIN B19 IOSTANDARD TMDS_33 } [get_ports { hdmi_tx_p[2] }]; #IO_L2P_T0_AD8P_35 Sch=hdmi_tx_p[2]
+
+##HDMI TX CEC
+#set_property -dict { PACKAGE_PIN E19 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_cec }]; #IO_L5N_T0_AD9N_35 Sch=hdmi_tx_cec
+
+
+##Pmod Header JA (XADC)
+#set_property -dict { PACKAGE_PIN N15 IOSTANDARD LVCMOS33 } [get_ports { ja[0] }]; #IO_L21P_T3_DQS_AD14P_35 Sch=JA1_R_p
+#set_property -dict { PACKAGE_PIN L14 IOSTANDARD LVCMOS33 } [get_ports { ja[1] }]; #IO_L22P_T3_AD7P_35 Sch=JA2_R_P
+#set_property -dict { PACKAGE_PIN K16 IOSTANDARD LVCMOS33 } [get_ports { ja[2] }]; #IO_L24P_T3_AD15P_35 Sch=JA3_R_P
+#set_property -dict { PACKAGE_PIN K14 IOSTANDARD LVCMOS33 } [get_ports { ja[3] }]; #IO_L20P_T3_AD6P_35 Sch=JA4_R_P
+#set_property -dict { PACKAGE_PIN N16 IOSTANDARD LVCMOS33 } [get_ports { ja[4] }]; #IO_L21N_T3_DQS_AD14N_35 Sch=JA1_R_N
+#set_property -dict { PACKAGE_PIN L15 IOSTANDARD LVCMOS33 } [get_ports { ja[5] }]; #IO_L22N_T3_AD7N_35 Sch=JA2_R_N
+#set_property -dict { PACKAGE_PIN J16 IOSTANDARD LVCMOS33 } [get_ports { ja[6] }]; #IO_L24N_T3_AD15N_35 Sch=JA3_R_N
+#set_property -dict { PACKAGE_PIN J14 IOSTANDARD LVCMOS33 } [get_ports { ja[7] }]; #IO_L20N_T3_AD6N_35 Sch=JA4_R_N
+
+
+##Pmod Header JB (Zybo Z7-20 only)
+#set_property -dict { PACKAGE_PIN V8 IOSTANDARD LVCMOS33 } [get_ports { jb[0] }]; #IO_L15P_T2_DQS_13 Sch=jb_p[1]
+#set_property -dict { PACKAGE_PIN W8 IOSTANDARD LVCMOS33 } [get_ports { jb[1] }]; #IO_L15N_T2_DQS_13 Sch=jb_n[1]
+#set_property -dict { PACKAGE_PIN U7 IOSTANDARD LVCMOS33 } [get_ports { jb[2] }]; #IO_L11P_T1_SRCC_13 Sch=jb_p[2]
+#set_property -dict { PACKAGE_PIN V7 IOSTANDARD LVCMOS33 } [get_ports { jb[3] }]; #IO_L11N_T1_SRCC_13 Sch=jb_n[2]
+#set_property -dict { PACKAGE_PIN Y7 IOSTANDARD LVCMOS33 } [get_ports { jb[4] }]; #IO_L13P_T2_MRCC_13 Sch=jb_p[3]
+#set_property -dict { PACKAGE_PIN Y6 IOSTANDARD LVCMOS33 } [get_ports { jb[5] }]; #IO_L13N_T2_MRCC_13 Sch=jb_n[3]
+#set_property -dict { PACKAGE_PIN V6 IOSTANDARD LVCMOS33 } [get_ports { jb[6] }]; #IO_L22P_T3_13 Sch=jb_p[4]
+#set_property -dict { PACKAGE_PIN W6 IOSTANDARD LVCMOS33 } [get_ports { jb[7] }]; #IO_L22N_T3_13 Sch=jb_n[4]
+
+
+##Pmod Header JC
+#set_property -dict { PACKAGE_PIN V15 IOSTANDARD LVCMOS33 } [get_ports { jc[0] }]; #IO_L10P_T1_34 Sch=jc_p[1]
+#set_property -dict { PACKAGE_PIN W15 IOSTANDARD LVCMOS33 } [get_ports { jc[1] }]; #IO_L10N_T1_34 Sch=jc_n[1]
+#set_property -dict { PACKAGE_PIN T11 IOSTANDARD LVCMOS33 } [get_ports { jc[2] }]; #IO_L1P_T0_34 Sch=jc_p[2]
+#set_property -dict { PACKAGE_PIN T10 IOSTANDARD LVCMOS33 } [get_ports { jc[3] }]; #IO_L1N_T0_34 Sch=jc_n[2]
+#set_property -dict { PACKAGE_PIN W14 IOSTANDARD LVCMOS33 } [get_ports { jc[4] }]; #IO_L8P_T1_34 Sch=jc_p[3]
+#set_property -dict { PACKAGE_PIN Y14 IOSTANDARD LVCMOS33 } [get_ports { jc[5] }]; #IO_L8N_T1_34 Sch=jc_n[3]
+#set_property -dict { PACKAGE_PIN T12 IOSTANDARD LVCMOS33 } [get_ports { jc[6] }]; #IO_L2P_T0_34 Sch=jc_p[4]
+#set_property -dict { PACKAGE_PIN U12 IOSTANDARD LVCMOS33 } [get_ports { jc[7] }]; #IO_L2N_T0_34 Sch=jc_n[4]
+
+
+##Pmod Header JD
+#set_property -dict { PACKAGE_PIN T14 IOSTANDARD LVCMOS33 } [get_ports { jd[0] }]; #IO_L5P_T0_34 Sch=jd_p[1]
+#set_property -dict { PACKAGE_PIN T15 IOSTANDARD LVCMOS33 } [get_ports { jd[1] }]; #IO_L5N_T0_34 Sch=jd_n[1]
+#set_property -dict { PACKAGE_PIN P14 IOSTANDARD LVCMOS33 } [get_ports { jd[2] }]; #IO_L6P_T0_34 Sch=jd_p[2]
+#set_property -dict { PACKAGE_PIN R14 IOSTANDARD LVCMOS33 } [get_ports { jd[3] }]; #IO_L6N_T0_VREF_34 Sch=jd_n[2]
+#set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { jd[4] }]; #IO_L11P_T1_SRCC_34 Sch=jd_p[3]
+#set_property -dict { PACKAGE_PIN U15 IOSTANDARD LVCMOS33 } [get_ports { jd[5] }]; #IO_L11N_T1_SRCC_34 Sch=jd_n[3]
+#set_property -dict { PACKAGE_PIN V17 IOSTANDARD LVCMOS33 } [get_ports { jd[6] }]; #IO_L21P_T3_DQS_34 Sch=jd_p[4]
+#set_property -dict { PACKAGE_PIN V18 IOSTANDARD LVCMOS33 } [get_ports { jd[7] }]; #IO_L21N_T3_DQS_34 Sch=jd_n[4]
+
+
+##Pmod Header JE
+#set_property -dict { PACKAGE_PIN V12 IOSTANDARD LVCMOS33 } [get_ports { je[0] }]; #IO_L4P_T0_34 Sch=je[1]
+#set_property -dict { PACKAGE_PIN W16 IOSTANDARD LVCMOS33 } [get_ports { je[1] }]; #IO_L18N_T2_34 Sch=je[2]
+#set_property -dict { PACKAGE_PIN J15 IOSTANDARD LVCMOS33 } [get_ports { je[2] }]; #IO_25_35 Sch=je[3]
+#set_property -dict { PACKAGE_PIN H15 IOSTANDARD LVCMOS33 } [get_ports { je[3] }]; #IO_L19P_T3_35 Sch=je[4]
+#set_property -dict { PACKAGE_PIN V13 IOSTANDARD LVCMOS33 } [get_ports { je[4] }]; #IO_L3N_T0_DQS_34 Sch=je[7]
+#set_property -dict { PACKAGE_PIN U17 IOSTANDARD LVCMOS33 } [get_ports { je[5] }]; #IO_L9N_T1_DQS_34 Sch=je[8]
+#set_property -dict { PACKAGE_PIN T17 IOSTANDARD LVCMOS33 } [get_ports { je[6] }]; #IO_L20P_T3_34 Sch=je[9]
+#set_property -dict { PACKAGE_PIN Y17 IOSTANDARD LVCMOS33 } [get_ports { je[7] }]; #IO_L7N_T1_34 Sch=je[10]
+
+
+##Pcam MIPI CSI-2 Connector
+## This configuration expects the sensor to use 672Mbps/lane = 336 MHz HS_Clk
+#create_clock -period 2.976 -name dphy_hs_clock_clk_p -waveform {0.000 1.488} [get_ports dphy_hs_clock_clk_p]
+#set_property INTERNAL_VREF 0.6 [get_iobanks 35]
+#set_property -dict { PACKAGE_PIN J19 IOSTANDARD HSUL_12 } [get_ports { dphy_clk_lp_n }]; #IO_L10N_T1_AD11N_35 Sch=lp_clk_n
+#set_property -dict { PACKAGE_PIN H20 IOSTANDARD HSUL_12 } [get_ports { dphy_clk_lp_p }]; #IO_L17N_T2_AD5N_35 Sch=lp_clk_p
+#set_property -dict { PACKAGE_PIN M18 IOSTANDARD HSUL_12 } [get_ports { dphy_data_lp_n[0] }]; #IO_L8N_T1_AD10N_35 Sch=lp_lane_n[0]
+#set_property -dict { PACKAGE_PIN L19 IOSTANDARD HSUL_12 } [get_ports { dphy_data_lp_p[0] }]; #IO_L9P_T1_DQS_AD3P_35 Sch=lp_lane_p[0]
+#set_property -dict { PACKAGE_PIN L20 IOSTANDARD HSUL_12 } [get_ports { dphy_data_lp_n[1] }]; #IO_L9N_T1_DQS_AD3N_35 Sch=lp_lane_n[1]
+#set_property -dict { PACKAGE_PIN J20 IOSTANDARD HSUL_12 } [get_ports { dphy_data_lp_p[1] }]; #IO_L17P_T2_AD5P_35 Sch=lp_lane_p[1]
+#set_property -dict { PACKAGE_PIN H18 IOSTANDARD LVDS_25 } [get_ports { dphy_hs_clock_clk_n }]; #IO_L14N_T2_AD4N_SRCC_35 Sch=mipi_clk_n
+#set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVDS_25 } [get_ports { dphy_hs_clock_clk_p }]; #IO_L14P_T2_AD4P_SRCC_35 Sch=mipi_clk_p
+#set_property -dict { PACKAGE_PIN M20 IOSTANDARD LVDS_25 } [get_ports { dphy_data_hs_n[0] }]; #IO_L7N_T1_AD2N_35 Sch=mipi_lane_n[0]
+#set_property -dict { PACKAGE_PIN M19 IOSTANDARD LVDS_25 } [get_ports { dphy_data_hs_p[0] }]; #IO_L7P_T1_AD2P_35 Sch=mipi_lane_p[0]
+#set_property -dict { PACKAGE_PIN L17 IOSTANDARD LVDS_25 } [get_ports { dphy_data_hs_n[1] }]; #IO_L11N_T1_SRCC_35 Sch=mipi_lane_n[1]
+#set_property -dict { PACKAGE_PIN L16 IOSTANDARD LVDS_25 } [get_ports { dphy_data_hs_p[1] }]; #IO_L11P_T1_SRCC_35 Sch=mipi_lane_p[1]
+#set_property -dict { PACKAGE_PIN G19 IOSTANDARD LVCMOS33 } [get_ports { cam_clk }]; #IO_L18P_T2_AD13P_35 Sch=cam_clk
+#set_property -dict { PACKAGE_PIN G20 IOSTANDARD LVCMOS33 PULLUP true} [get_ports { cam_gpio }]; #IO_L18N_T2_AD13N_35 Sch=cam_gpio
+#set_property -dict { PACKAGE_PIN F20 IOSTANDARD LVCMOS33 } [get_ports { cam_scl }]; #IO_L15N_T2_DQS_AD12N_35 Sch=cam_scl
+#set_property -dict { PACKAGE_PIN F19 IOSTANDARD LVCMOS33 } [get_ports { cam_sda }]; #IO_L15P_T2_DQS_AD12P_35 Sch=cam_sda
+
+
+##Unloaded Crypto Chip SWI (for future use)
+#set_property -dict { PACKAGE_PIN P19 IOSTANDARD LVCMOS33 } [get_ports { crypto_sda }]; #IO_L13N_T2_MRCC_34 Sch=crypto_sda
+
+
+##Unconnected Pins (Zybo Z7-20 only)
+#set_property PACKAGE_PIN T9 [get_ports {netic19_t9}]; #IO_L12P_T1_MRCC_13
+#set_property PACKAGE_PIN U10 [get_ports {netic19_u10}]; #IO_L12N_T1_MRCC_13
+#set_property PACKAGE_PIN U5 [get_ports {netic19_u5}]; #IO_L19N_T3_VREF_13
+#set_property PACKAGE_PIN U8 [get_ports {netic19_u8}]; #IO_L17N_T2_13
+#set_property PACKAGE_PIN U9 [get_ports {netic19_u9}]; #IO_L17P_T2_13
+#set_property PACKAGE_PIN V10 [get_ports {netic19_v10}]; #IO_L21N_T3_DQS_13
+#set_property PACKAGE_PIN V11 [get_ports {netic19_v11}]; #IO_L21P_T3_DQS_13
+#set_property PACKAGE_PIN V5 [get_ports {netic19_v5}]; #IO_L6N_T0_VREF_13
+#set_property PACKAGE_PIN W10 [get_ports {netic19_w10}]; #IO_L16P_T2_13
+#set_property PACKAGE_PIN W11 [get_ports {netic19_w11}]; #IO_L18P_T2_13
+#set_property PACKAGE_PIN W9 [get_ports {netic19_w9}]; #IO_L16N_T2_13
+#set_property PACKAGE_PIN Y9 [get_ports {netic19_y9}]; #IO_L14P_T2_SRCC_13
+
+
--
GitLab